Yes the topic says it all.
How many of us use PPE when working with hand tools. I wear my eye protection and hearing protecting "when chopping wood".
Scraper no need for respirator. Sanding I do with a dust mask.
Hand planes just eye protection.
Yes the topic says it all.
How many of us use PPE when working with hand tools. I wear my eye protection and hearing protecting "when chopping wood".
Scraper no need for respirator. Sanding I do with a dust mask.
Hand planes just eye protection.
You should probably clarify what PPE stands for. Not everyone is familiar with this American acronym.
Eye protection - always.
Hearing protection - when using power equipment.
Respirator - when sanding (except when using Festool sander and vacuum)
Respirator with organic filters - when using spray finishing equipment
Hand protection - gloves when handling splintery boards. Rubber gloves when handling organic solvent-based finishing products.
Hand injuries are the highest risk, followed by eye injury. Respiration problems are high risk for those that use spray equipment a lot, or work in dusty environments. Woodworking presents dust hazards. Good idea to consider the risks of inhaling sawdust when selecting wood.
What does PPE stand for?
Clueless in Perth
Derek
Clueless in Holland as well.
Personal Protection Equipment??
I always wear dust respirator, face shield, and hearing protection on most jobs while using power tools and sanding.
My Dad always told me "Can't Never Could".
SWE
Always eye protection.
Usually a mask when grinding or sharpening.
"All that is necessary for the triumph of evil is that good men do nothing."
“If you want to know what a man's like, take a good look at how he treats his inferiors, not his equals.”
Sorry guys. PPE stands for Personal Protection Equipment
Handplanes : nothing.
Mortising: eye protection.
Sawing , especially Japanese saws, I (should) use a mask.
A leather apron and leather shoes when working with chisels in case you drop one.
Lee Schierer
USNA '71
Go Navy!
My advice, comments and suggestions are free, but it costs money to run the site. If you found something of value here please give a little something back by becoming a contributor! Please Contribute
I really dislike the use of acronyms and seldom use them.
I wear glasses and I always buy them with safety lenses so I always have some eye protection. I increase that with safety goggles when power tool use comes into play. Dust masks when sanding or grinding. Respirator for finishing or when using some types of chemicals. I also have carving gloves for use in some situations, nitrile gloves for chemicals, and work gloves with grip help (not around power tools). Bump caps if working overhead or in cases where you may bump your head. Hard hat where required. None slip shoes for the surface your standing on. I do own steel toes should I need them. Seems like a lot doesn't it. Believe me it comes mostly from experiences. I've had my share of stitches objects removed from my eyes toes run over by equipment. All of this is to protect you after the accident occurs. Think about what you are doing and prevention is the first PPE.
Jim
Safety glasses (always)
Hearing protection when using corded beasts, tractor, or mower
Nitrile gloves when handling finishes or chemicals
Cut resistant gloves when using chisels or gouges (too may scars on left hand from not wearing)
Dust mask for power sanding
Face shield for grinding or weed whacking.
Never felt the need. During the summer months I'm as likely to be barefoot with no shirt and just cargo shorts on while in the shop. Please note that this is not a recommendation to do so.
Your endgrain is like your bellybutton. Yes, I know you have it. No, I don't want to see it.
Zach steps up and boldly speaks for the silent majority. Hoorah!
My take?
- Hand tools: most often no PPE
- Power tools: most often PPE best practices