I recently purchased a CX 20 from Busy Bee (AKA GO454, Yorkcraft 20" planer etc). Finally got around to applying my dial gauge. I have found that there is a difference of almost 1/100th inch in the distance between the main table and the cutterhead on one side and the other. I can find no instructions hoe to adjust either the cutterhead to the main table.
As I see it, I have two choices. I can try to set the blades in such a way as to cancel out the difference, or adjust the bottom rollers to compensate. I believe the former would be just ridiculously difficult, so I am leaning towards adjusting the rollers.
I guess another option would be to just say to he77 with it and ensure I flip the board over to even out the cut.
If anyone is aware of how to adjust the table or cutter head, do tell.
If anyone has facts to support the concept of adjusting the rollers or blades to compensate, or for just leaving it be, I am also interested.
Opinions based on logic are also welcome.