Bert,
Another source is
Chewbarka.com
Type: Posts; User: Tony Lenkic; Keyword(s):
Bert,
Another source is
Chewbarka.com
For my speedy 300 I added Quatro fume extractor and has been working well.
Filters can add operating costs as they are consumables.
Google this site: Quatro CSA 600 Fume Extractor
Hi Andy,
I've got some "O" rings from local industrial supplier. They are not direct replacements for original but they are inexpensive and been using them for few years now.
Get your set and...
Try this place:
https://www.delviesplastics.com/c/acrylic-plexiglass-sheet.html
LaserBricks from Lasescetch LTD. is what you may be looking for.
Bert,
It sound to me as what you have is a Lexan (polycarbonate) sheet.
Tell your customer to bring you Acrylic piece.
Kev,
Just found an old 2017 Marco cat. and on page 38 there is list of part numbers for opaque colors but no actual color chart.
For red opaque part # is H114-17. At bottom of listing it says...
Machine has to be running and connected to PC.
Once machine was connected, just pressed ctrl - alt - s
then select offset.
Make adjustments and
then click 'get present offsets' and apply.
There is a setting to adjust offset for both axis.
Go to: options/service/service settings/offset
You will have to measure with micrometer and adjust one or both axis to best results.
Here is my way to position text on an object.
If you have a heat gun cut portion of clear plastic bottles and place it on an object. With heat gun plastic will take a shape over the your part and...
Dylan,
When burnishing you bypass sensor altogether and use setup in your program for down travel.
I don't have experience with New Hermes program, Kev has a ton and will instruct you how to.
...
"Touch sensor" on my Xenetechs is called "Proximity sensor"
It works as Kev described. In fully auto mode 'Y" axis moves downward till nosecone hits material and initiates Proxy sensor to stop...
Shop by manufacturer will bring the results you need. Enter in search C.H, Hanson
Try this:
https://www.tooldiscounter.com/search?q=c.h.+hanson+tags&page=10&fp=1641
Try this distributor for C.H. Hanson (original manufacturer)
www.tooldiscounter.com
Bill,
What shape of stainless tags you need?
I may have an alternate source.
Jorlink.com in North Carolina is distributor of GCC lasers.
Guden is a gas shock manufacturer in NY that Mike could not recall the name.
Mike,
You are thinking of Guden............Right?
Bert,
Try holding F8 key on startup. This will force Corel as new install.
I have a Speedy 300 with Quatro fume extractor that is factory wired to turn on automatically when laser is in operation.
Since Atmos is Trotec extractor it should do same.
Rowmark does make this product but it is not stock item with distributors.
Part # is 223-612.
You may have to order it with local distributor as a special order.
You can start looking in...........https://www.coloradoheirloom.com/wood-strip-br/-6-x-24-x-br/-1/16-3/32-1/8-3/16-or-1/4.aspx
Scott,
Check this site for used lasers.........https://www.laserresale.com/
Did you check on laser accessories second page?
At bottom of first page there are navigating arrows with numbers 1 2 3 in middle. Click on # 2 page than scroll down.
ASC365.com sells China lenses as small as 12mm, so it is possible that 16.25mm do exist.