View Full Version : Looking for lamp designs.
Jesus Torres
12-14-2009, 5:04 PM
Hi people and merry christmas. Im looking for any design or ideas to making a lamp. Any help welcome. Thanks.
Sergio Arze
12-14-2009, 8:56 PM
You can try making something like this which is not too hard. Good luck;)
Gary Lyben
12-14-2009, 9:49 PM
There are a few free plans here, they are all laser cut from thin wood or tyvek
http://www.ponoko.com/showroom/category?query=Lighting
This is an interesting company, they don't have a US distributor yet, click on the design link then lighting:
http://www.microwood.com/
I make these:
yourpersonalizedspace.com
The art work is all copyrighted, but I could give out the basic box design, they are cut from 1/8 baltic birch.
Best regards
Gary
Gary Lyben
12-17-2009, 10:01 PM
Hi
Here is the blank lamp cutting diagram in both illustrator and eps formats, I need to re install corel, so I can't post a .cdr file
I've also sent a couple of pics of finished lamps.
It takes a cord like this one:
http://www.nationalartcraft.com/images/sub-0016-03.jpg
from here:
http://www.nationalartcraft.com/subcategory.asp?gid=1&cid=1&scid=16
Best regards
Gary
Dee Gallo
12-18-2009, 8:05 AM
You can try making something like this which is not too hard. Good luck;)
Sergio, I really like this lamp! What material did you use?
cheers, dee
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.