View Full Version : Neanderthal Haven
- Need some rasp help
- Stanley No 8 Type
- Dress for Success
- Just what I needed?
- Half backs with a little twist.
- Plane question
- power stropping
- A Fine Day's Work
- Strop Compound Question
- Stanley Logo date question
- Millers Falls No. 210 Bench-mounted drill press
- Damon Rakie & Co metal plane info please
- Bevel Up Woodie?
- Lever cap screw seized in frog
- Old Street Tool
- Rust Hunting finds...
- A Mystery Tool
- Help with a Stanley #2
- Getting back into things...
- Workbench top - horizontal laminations using dimensional lumber?
- Cool Wooden Mystery Plane!
- unknown (to me) Stanley No 80 - rare?
- Replacement Jointer
- Recommendations on saw steel
- Brass Eggbeater?
- Can anyone ID a Japanese natural stone?
- Small mallet makers
- Cutting a very wide dado
- Found Starrett Machinists squares today.
- Fracture test of a Harbor Freight file
- Diamond paste grits
- Low Angle Jack Rabbet
- gouge tool rool dealers?
- BIG saw, but no name?
- Saw handle profiles needed
- Planing Cherry
- Stanley#12 Handle Question
- Shop made fence for #7 jointer plane ideas?
- Home center poplar killing my blade edge -anyone else had this? Leftover grit?
- New Tools for the New Shop
- Eggbeater rehab
- Stanley 720 Chisel Advice
- Another Mystery saw???
- Hollows and Rounds - anybody made a set?
- Anyone Familiar with Ax Maker?
- An Idea Plane for the Plane Makers
- Cutting dovetails on a tall piece
- Handyman planes???
- Hand powered mortise machine
- bench top shave horse
- Pst, Hey You, Looking for Some Rust?
- Made a grooving plane - now how do I make the tonguing one?
- Work Bench Top Size? / Butcher Block
- Newbie Sharpening Help and Small Gloat (Maybe)
- Collar for an old Wood Screw?
- The Tradition Woodworker Company House Brand Chisel?
- Traditional Carpentry and Finish Work
- #4 Stanley advice
- Looking for Rust in New England
- The AYS Leg Vise Chain Adjuster
- Improvised cap for application spout
- Vises not so good on Sjobergs bench.
- Veritas tongue and groove Irons -- will they work on a Stanley 45?
- Another Leg vise question
- Finished V-Plane
- RUSTHUNTER find: Marples X4 infill plane
- New Project Plane
- First Acoustic guitar build--Advise please.
- Straightening a bowed board
- 2nd hand cut dovetail
- Stanley Chisel type study... Please check this out!
- Is this a gloat
- Any one seen a Japanned Lever Cap on a Stanley No. 1 Plane?
- Project Plane: Almost done
- Which DMT flattening stone for Shapton GS?
- Anyone drooling over John Neeman's tools besides me?
- Terry Gordon's snipe bill planes
- Waterstone not well secured to base - recommended fix?
- Restore Plane Sole on Stanley Bailey #29
- Some Steps in Hollow Plane Re-Manufacture
- At least I'm useful for something.
- Need some education on a #45
- any way to fill torsion box cells so I can add bench dogs?
- A chisel handle
- Japanese Chisels... Which ones to get?
- funky new plane from LV
- Wascally wabbet
- Stanley 105 Miter Box
- A very unusual 11 year old
- WIA-Pasadena Ad Hoc Meet-up
- Block plane ID?
- Frankensaw?
- Lambs Tongue Tutorial?
- I can do that
- To finish or not to finish a workbench base question
- Millers Falls No. 07 blade?
- Next project, box of parts into a plane?
- New Tool Purchase - Need Your Opinion
- Keeping glue warm
- Tom Law, RIP
- What kind of molding plane is this? Is it a modling plane?
- Just another 10" Dovetail saw
- Stanley 750s
- almond oil and other non drying oil
- How Flat is Flat Enough
- How do you use your bar gauge?
- Block plane Id: Knobs???
- Cost of infill plane kits?
- New CL find -Stanley 100
- I'm back !
- Stanley 75 question
- Anyone notice the new LV stuff?
- Shout out for Lie Nielsen
- New LV striking/marking knives -- low budget version of Blue Spruce?
- New to hand planes need some help
- Veritas Planing Stop - finally, a really good use of extruded aluminum!
- New house + dumb luck = my question
- Craftsman #6803 "push type" screwdriver
- Need help with #5 Jack plane recommendation?
- Veritas Rip Saw chatter
- A plumb bob I made in 1980
- Handle hardware, make your own??
- Pics of the new work space
- Tung or Danish oil?
- cutting down plane blades and scrapers...
- Fray Brace
- Molding Design
- Veritas PMV11 - End grain dream come true!
- Anyone seen one of these?
- Need advise on size of twin screw chop
- Axe Repair
- M/F #1 pinion removal problem
- Making a mortise chisel from a file
- Mortise chisel sharpening
- Stanley/ Craftsman #18?
- A Stanley #5
- Evaluation of the LV PM-V11 chisel for chopping dovetails
- Hardware advice needed / tool cabinet coming together
- What is the name of this chuck?
- My Next BadAxe
- Talk about a dumb ?.....
- Restored an old friend
- LV bevel up jointer
- Looking for a really decent 200 grit stone..
- Enco free shipping and discount code
- New PM-V11 iron
- Yet another wooden plane materials question
- Scrub plane suggestions
- vertical plane storage (tool cabinet)
- Just a dollar?
- Mid priced japanese saws?
- Inlay and Stringing Wood Combinations
- I don't think that's pine...
- Lee Valley Free Shipping
- Tool Cab: Selecting a strong enough piano hinge?
- Mallet suggestions
- improving hand grip
- Mortising Technique
- Planing a sliding dovetail
- A visit to Tashiro Hardware in Seattle
- Stanley 55 Labels
- Survey says:
- The Last Clog Maker in England
- No Jorgensen Clamps or Vises in the new Lee Valley Catalog
- Thining Tung oil - can I use any paint thinner?
- Recommendations for a "Cost Effective" way to flatten waterstones, please...
- Millers Falls 2A question
- Wooden Circular Plane
- Oops. Advice?
- Auriou rasps
- Stanley #33?
- Block plane choices?
- Putting a curved/convex edge on a bevel up plane iron etc?
- Drawer side & other timber choices?
- Bench hook Saw Guide
- need advice on making hollow & round planes
- A way to hide grooves I never thought of . . .
- Benchroom pix as requested
- Finish on tool holders?
- Lee Valley inset vise ;)
- Scratch Stock question
- Bench Gouges
- Jointer and Smoother
- Mineral oil and bee's wax
- LV Precision Square
- Moulding plane tutorial needed
- Advise on Brace Bits Needed
- HELP! Chipbreaker bending blade
- My weekend score, braces.
- What are these?
- String inlay instructions?
- Using LN #7 to add 3" of Mahogany to door after cutting 3" off
- Mystery blade? Savage #6 plane
- Improving a Miller's Falls Jack Plane
- Workbench top alternative
- Use a Stanley 45 as a Dovetail Plane?
- Grinder advice
- Lie Nielsen Shoot Board
- Leather Lined vises - Show and tell
- Hand scraped look? Best method
- PM VII LV plane blade
- Lee Valley BU blade dimensions? Altering PMV11 blades?
- Tapered Irons for H & R's
- Chamois leather for power strop?
- Timber Framing Axes
- Why do only garden tool files have built-in handles?
- Another unidentified old tool (Gage set?)
- A dovetail design for your consideration.
- Galveston Luthier
- Bevel up sharpening question
- File handles
- Old lathe questions
- Diston saw, part gloat part info seeking
- Sharpener question. Tormek vs Jet
- Bolt for a handle?
- Yard sale finds...
- Stanley plane type question
- Old tools, a "little" better than money under the matress
- A few Infills
- Lee Valley Jointer Fence
- Is this a good grinding wheel?
- Online courses
- Vintage Miter Boxes vs Power tool mitersled/CMS question
- Stanley 150 Mitre Box Color Scheme?
- A couple for my till
- Millers Falls Problem???
- It's an illness. Has to be.
- Shop Made Backsaw
- First Neander Project With Shop-made Woodies
- Suggested motion for flattening Stanley no. 5 sole
- Hand Tools in Grand Rapids, MI
- Tote/knob for Veritas LA block plane?
- Saw Sharpening Question
- Boggs Tool sharpening service for old rasps BIG PICTURES
- leather for strop
- Wood River Chisel Plane
- how do oil stones work?
- A Disston Jubilee saw - use it or not?
- Veritas Router Plane as a plough plane
- Keeping a saw from tip slapping back and forth on back stroke?
- The Mighty Miter Shooter
- Hollows and Rounds- Buy or build?
- Resawing - Hand saw
- Paint colour match?
- purchased plane tote and knob
- Drawknife suggestions?
- Paring Chisels
- Sealing wood from water
- warm and sunny, with a 50% chance of gloats
- Flattening waterstones
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.