Ok guys, those who have used the waterlox products I got a question. I'm finishing a table made of industrial flooring that's a combo of heart pine, douglas fur and who knows what other pine might be in there and a couple of pieces are still really resinous. Anyhow, first coat went on and this stuff was thirsty, (all air dried)! After 24hrs it barely looked like it had any finish on it at all. So I went on with my second coat and now 24 hrs later it's 95% dry but some places feels a little rubbery. Not tacky, just rubbery. Should I wait a little longer before I sand it? Thanks!
(pic is about 20hrs after first coat.)
IMG_20171208_014230.jpg