Had to pull up a 2 x3 concrete paver. My God, thing is HEAVY !!! Well, I dug out some of the dirt it was resting on, and leveled it off so that it was not up 1 solid Inch on the end of the Paver. Noticed a tree root from the old Pine tree that is next to the Paver that runs right underneath in the middle where the Paver sets. So, I chopped some it away and set the paver back down. Sits level with the other pavers, but when I walk on it , it rocks up about a quarter of a inch. Not much, but noticeable.


Should I pull that paver back up and chop that root out ? Is a Tiger Saw going to be able to cut through that root AND the dirt around that root ?