I've been looking at plans for doors and all rail/style cutters either cut a 1/4" or 1/2" tongue groove. I need to build a door with 1/2" panels that are not raised (so I need a 1/2" slot) and 1/4" laminated glass.
What would be the proper way to do this, because it seems like you have to cut the 1/2" groove all the way down the rails. The glass needs to start at the rail, so you would have to shim it by 1/8" on both sides of the glass? The other problem is, this won't allow for replacement of the glass.
I've been racking my brain trying to figure out the best way to approach this and haven't come up with any great ideas.