So I have finally got ride of the old carpet on the stairs and replaced it with hardwood. I made(edge glued) the red oak treads myself, as well as the MDF risers. I also hardwired led lights under the noses.
Yesterday I finally put everything together, had to shim most of the stairs as there were almost 1/4 difference from the back to front on quite some old treads. I used PL300 to glue the shims and treads(did not use any nails)
Everything looks nice, BUT, the new stairs squeak loudly when people walk on it, it seems every treads is squeaky.
I am not sure what might be the reason, the shims? or I cut the treads too tight they rub the skirtboard? How can I tell and is there any fix? Thanks!
stairbefore2.jpg
YG5_3176.jpg
YG5_3171.jpg