how would you make this chamfered edge?

[Keith Outten]

You might try looking at Amana router bits. Amana sells some very tiny bits that have very small bearings, I have one that I use to round over interior edges of door signs. The bearing is tiny and doesn't require much of a lip at all.

Start Here

[Edwin Santos]

You might try looking at Amana router bits. Amana sells some very tiny bits that have very small bearings, I have one that I use to round over interior edges of door signs. The bearing is tiny and doesn't require much of a lip at all.

Start Here

Wasn't aware of these miniature bits. Thanks for the lead on them.