Results 1 to 13 of 13

Thread: Scott shop towels, old vs new

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Nov 2007
    Location
    Goleta / Santa Barbara
    Posts
    980
    John, appreciate your efforts . . .but am a bit surprised you have that much free time on the farm. To put that last part in context, i am always impressed (and personally disheartened) with the amount of things you get done with the farm, the mentoring of the next generation, the animals, turning, posting here, etc, etc, etc.

    Back to the original subject matter, I was not even aware of the Wypall towels mentioned in that thread. NOT suggesting you do a side-by-side, but am curious for feedback from people here that have used both.

  2. #2
    ...'that much free time'... lol.. I'll bet it took him 15 minutes
    ========================================
    ELEVEN - rotary cutter tool machines
    FOUR - CO2 lasers
    THREE- make that FOUR now - fiber lasers
    ONE - vinyl cutter
    CASmate, Corel, Gravostyle


  3. #3
    Join Date
    Nov 2007
    Location
    Goleta / Santa Barbara
    Posts
    980
    Quote Originally Posted by Kev Williams View Post
    ...'that much free time'... lol.. I'll bet it took him 15 minutes
    Well, perhaps, but it would take many of us that much time to create a clear spot on the bench to do the test . . . .

  4. #4
    Join Date
    Sep 2010
    Location
    New England
    Posts
    2,483
    Quote Originally Posted by Patrick McCarthy View Post
    Well, perhaps, but it would take many of us that much time to create a clear spot on the bench to do the test . . . .
    Oh man, can I ever relate to that! I have too many days when I don't have anything pressing to do and I tell myself, just go down to the shop and put things away.

    Oh man again. What a perfect example of a poorly constructed sentence. Re-Do: On the few days when I don't have anything pressing to do, I tell myself, just go down to the shop and put things away.

    Back on topic- maybe 8 years ago I bought a lifetime supply of Scott towels so I can't relate to the new ones. Still have more than a dozen left.

    So- sorry for wasting everyone's time.

    Wait a sec. A lifetime supply and I'm down to a bakers dozen??????

  5. #5
    Join Date
    Mar 2006
    Location
    SoCal
    Posts
    22,516
    Blog Entries
    1
    Quote Originally Posted by Patrick McCarthy View Post
    Well, perhaps, but it would take many of us that much time to create a clear spot on the bench to do the test . . . .
    This is indicative of a different topic / problem
    "A hen is only an egg's way of making another egg".


    – Samuel Butler

  6. #6
    Join Date
    Feb 2008
    Location
    E TN, near Knoxville
    Posts
    12,298
    Quote Originally Posted by Patrick McCarthy View Post
    Well, perhaps, but it would take many of us that much time to create a clear spot on the bench to do the test . . . .
    That can be a problem!

    When I bought a new roll-around tool box it came with a feature I've never seen before: a pull-out work table. It's over 32" wide and made from glued-up hardwood about 5/8" thick, hinged to access a good-sized drawer space below. I keep some of the tools I don't use as much in that drawer.

    toolbox_work_shelf_20210901_133013.jpg

    What an amazingly useful thing! At other tool boxes I was forever pulling out a drawer in an adjacent tool box just to give me a kind of flat spot to work on small things. This pull-out work surface is perfect for a zillion quick jobs, like checking and changing batteries, working on carburetors and such, electronics, and of course, comparing rolls of paper towels. As long as I don't keep IT junked up, there is always a clean workspace handy in the middle of the shop!

    Maybe a lot of the larger tool boxes come with these now but when shopping this was the only one I saw.

    JKJ

  7. #7
    Join Date
    Feb 2008
    Location
    E TN, near Knoxville
    Posts
    12,298
    Quote Originally Posted by Patrick McCarthy View Post
    John, appreciate your efforts . . .but am a bit surprised you have that much free time on the farm. ..
    Had extra time today! It’s been pouring rain which puts a damper on outdoor stuff, finished minimum feed and water chores early then I had some time between fixing breakfast and lunch. The Lovely Bride was between her reading and rest periods (kind of mobility limited after foot surgery last week) so when the case of Scotts was delivered I was curious if there was a difference. Had everything at hand so it didn’t take long, probably took more time to take the pictures and look up the inflation rate than it did to do the numbers!

    I’ve spent the afternoon goofing off myself, with hours of reading. Now headed out with a rain jacket and umbrella to check on the horses - moved the new mare into the pasture with the blind gelding yesterday then noticed him standing in the rain this morning while she was hogging the shelter! I’ve been doing a lot of horse juggling lately while they all establish their dominance order. He’s in his own protected place now but has no pasture - have to take food to him! Then have to check on the little peacocks before time to fix supper. Never a dull moment! (It does wear me out sometimes though, seems like I had a lot more energy back when I was 70 )

    JKJ

  8. #8
    I just bought a box after a year of going through 24 rolls. Definitely less soft. I specifically ought them because of how they work when applying CA finish on the lathe. I noticed that the new Scott towels are definitely less soft and more abrasive, just like every other brand.

  9. #9
    Join Date
    Mar 2019
    Location
    Los Angeles, California
    Posts
    978
    I live in the City and find piles of used clothing dumped in parking lots all the time, most of which are dirty soiled children's clothing. I happen to find these as a gold mine for shop towels. Free, T-Shirt Material, Lint Free, Cotton, and well, just perfect. I have two 40 gallon plastic drums of this so-called trash, and honestly they are hard to get rid of and hard to beat. I launder and reuse about half of them and still have a huge supply. I can't imagine buying shop towels.
    Regards,

    Tom

  10. #10
    Join Date
    Oct 2007
    Location
    Falls Church, VA
    Posts
    2,347
    Blog Entries
    1
    I just got some from Home Depot. I notice a peculiar chemical odor.

  11. #11
    Join Date
    Feb 2008
    Location
    E TN, near Knoxville
    Posts
    12,298
    Quote Originally Posted by Roger Feeley View Post
    I just got some from Home Depot. I notice a peculiar chemical odor.
    I never thought to do a smell test!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •