I built a TV lift cabinet. I also built speakers that will mount on either side of the lift to come up with the TV. The grills I made for the speakers have black grill cloth and as the TV is black I am planning to finish the speaker boxes in a satin black. I've made a lot of speaker boxes in the past out of MDF and oak plywood and finished them in satin black but I always used rattle cans. I'd like to spray these with my HVLP gun.
Would I spray them black and then a satin clear top coat? What material to spray?
I have a fair bit of experience spraying. My guns are conversion guns.
Here is a pic of the cabinet minus the doors.
TV Lift Cabinet finish.jpg