Hi all,
Probably a dumb/mundane question ...
I just finished my first try at working with plastic laminate. I made new countertops for the kitchen and laundry/utility room. I used Baltic birch for the substrate and am keeping the edges exposed for a modern look.
I also replaced the old tile window sill above the kitchen sink with an new sill made from PVC board and then made a little shelf to sit on top of the new sill. However, I am having trouble figuring out how to actually fasten the shelf down in an inconspicuous way.
I could use some construction adhesive, but I dislike using adhesives for fastening since this requires destruction to disassemble. I also thought a about using white trim-head screws through the top of the shelf, but am wondering if there is a fastening method that I haven't considered that would be even more invisible.
I've attached a photo. Ideally after fastening the shelf it would look just like the photo (no visible fasteners). Thanks for reading, and any advice you can offer.
IMG_0702 (Medium).JPG