Neighbor offered me the lumber from a huge ash tree she took down today. I'm a new turner, first real green wood.
From what I've read I need to seal it asap to prevent cracking/drying.
The pieces vary from about 10" to 20+" in diameter, with lengths 4-12'.
I have a chainsaw.
From what I've read I should:
A) cut into manageable lengths (long as possible) and seal the ends with anchorseal or latex paint, keeping round
B) Cut into manageable lengths but cut out the pith and seal ends
C) Cut into manageable lengths split in half exposing pith, and seal ends. (difference being leave pith vs remove it). This is easier than B, but better?
What should I do? I have a LOT of lumber here.
Thanks!