Page 1 of 2 12 LastLast
Results 1 to 15 of 29

Thread: Is there a better respirator that takes a 3M filter?

  1. #1
    Join Date
    Jun 2013
    Location
    Neither here nor there
    Posts
    3,831
    Blog Entries
    6

    Is there a better respirator that takes a 3M filter?

    I love my 3M mask, and it's easy to get filters for locally, but I hate the cheap elastic strap and cheap plastic fittings. The strap soon stretches out to a thin string, and/or one of the plastic tabs that holds it breaks. Everything else is just fine, but you can't just replace the strap- it is somehow fused to the mask- it doesn't just tie on or clip on.

    Who makes preferably a mask that takes the 3M filters, or if not that, who makes a mask in the $50 range that doesn't have a cheap strap? I'm not looking for a Trend Airshield here- just a dust mask that covers the mouth and nose and has dual filters, with interchangeable filters and options for types of filter. Filters have to be very readily available if they aren't 3M.

  2. #2
    Join Date
    Aug 2018
    Location
    Michigan, USA
    Posts
    548
    I have read good things about the RZ Mask. I don't have one yet, but it's on my wish list:

    https://rzmask.com/products/m2-5-dua...pollution-mask

    Replacement filters run ~ $2.50 - $4.50, depending on what specs you want.

  3. #3
    Join Date
    Nov 2004
    Location
    East Texas
    Posts
    230
    Quote Originally Posted by Gary Ragatz View Post
    I have read good things about the RZ Mask. I don't have one yet, but it's on my wish list:

    https://rzmask.com/products/m2-5-dua...pollution-mask

    Replacement filters run ~ $2.50 - $4.50, depending on what specs you want.
    I've been looking at RZ masks since seeing them on a woodworking website. Do you recommend the M2.5 (two straps for those who aren't familiar) or the M2 (with one strap)? The one strap looks more comfortable but the M2.5 might stay on better.

  4. #4
    Join Date
    Jun 2013
    Location
    Neither here nor there
    Posts
    3,831
    Blog Entries
    6
    Quote Originally Posted by Gary Ragatz View Post
    I have read good things about the RZ Mask. I don't have one yet, but it's on my wish list:

    https://rzmask.com/products/m2-5-dua...pollution-mask

    Replacement filters run ~ $2.50 - $4.50, depending on what specs you want.
    Wow, that looks comfortable. I may just spring for that and order a few extra filters. So I guess with active carbon it would be OK to use for solvents and epoxy, which is important for me.

  5. #5
    Join Date
    Mar 2003
    Location
    SE PA - Central Bucks County
    Posts
    65,688
    I recently bought the RZ mask as I'm doing a lot more hand-sanding right now with things like small boxes and ornaments coming off my CNC machine, many made from tropical hardwoods that I KNOW are going to be an issue for me. So far, I really like it.
    --

    The most expensive tool is the one you buy "cheaply" and often...

  6. #6
    Jim, did you get the 1-strap or 2-strap version?

  7. #7
    Join Date
    Jun 2013
    Location
    Neither here nor there
    Posts
    3,831
    Blog Entries
    6
    Quote Originally Posted by Jim Becker View Post
    I recently bought the RZ mask as I'm doing a lot more hand-sanding right now with things like small boxes and ornaments coming off my CNC machine, many made from tropical hardwoods that I KNOW are going to be an issue for me. So far, I really like it.
    I'm taking another look at this thing- so it seems this doesn't really have an air-tight seal. I guess this is really just for particulates and not fumes? I believe I'm still sold on it as a comfortable mask for sawdust, but I also want something for epoxy resins and solvents. For that I want something that seals to the face.

  8. #8
    Join Date
    Oct 2008
    Location
    Kapolei Hawaii
    Posts
    3,236
    Which 3M respirator do you have? I've bought the replacement elastic "spider" thing for mine. I use their half face respirator, although I can't recall the model number. The elastic thing just pops off of mine. I think it's comfortable. Well, not really. No mask is "comfortable", but I can use mine for hours without issues.

  9. #9
    I tried an "Elipse" respirator:
    https://www.amazon.com/GVS-SPR457-El.../dp/B013SIIBFQ

    but was disappointed with the poor face seal. Went back to the 3M one...

  10. #10
    Join Date
    Dec 2007
    Location
    Minot, ND
    Posts
    558
    I've used the MSA half mask respirators since i got fitted for them when doing HAZMAT response actions. Reasonably priced and there is a full range of filters available to whatever you wish to protect yourself from.

    Clint

  11. #11
    Join Date
    Feb 2008
    Location
    E TN, near Knoxville
    Posts
    12,298
    Quote Originally Posted by Malcolm Schweizer View Post
    I love my 3M mask, and it's easy to get filters for locally, but I hate the cheap elastic strap and cheap plastic fittings. The strap soon stretches out to a thin string, and/or one of the plastic tabs that holds it breaks. Everything else is just fine, but you can't just replace the strap- it is somehow fused to the mask- it doesn't just tie on or clip on.
    What model of 3M mask?

    I find the 7000 series far more comfortable than the 6000 which I used to buy. The connector is still plastic but the straps are better - unlike the 6000 masks no stretching so far even with a lot of use. Also the silicone rubber seals better than the other models. Not expensive, for example:
    https://www.amazon.com/gp/product/B008MCUT86
    https://www.amazon.com/gp/product/B008MCUS28

    I keep these in various sizes for shop visitors and woodturning students, and separate respirators for dusty farm tasks such as cleaning out poultry pens. (Repeat students and farm helpers get their own.)

    Are you sure the straps aren't replaceable? Maybe it varies by model - I don't remember the strap fused to the respirator on mine. I'll have to check. Amazon lists some, searched for replacement strap for 3m respirator.
    https://www.amazon.com/s/ref=nb_sb_n...+3m+respirator


    JKJ

  12. #12
    Join Date
    Feb 2007
    Location
    southeast Michigan
    Posts
    676
    I also recently bought the RZ mask (single strap) and love it. There were times before that with a quick job I didn't bother with my old dual cartridge rubber mask because it was a pain to put on (not to mention replacing the elastic every couple of years. Even with my beard the RZ mask is comfortable and doesn't impair using safety glasses. And the velcro strap makes it quick to put on and take off.

  13. #13
    Everone loves the RZ mask I bought it and had to quit using it. What am I doing wrong it fogs my glasses and push's them up where I can't see through them. I don't have a beard and my glasses don't have large lens but I just cannot get the RZ to work for me. Would aprecaite any advice to help make it work.

  14. #14
    Join Date
    Jun 2013
    Location
    Neither here nor there
    Posts
    3,831
    Blog Entries
    6
    Quote Originally Posted by John K Jordan View Post
    What model of 3M mask?

    I find the 7000 series far more comfortable than the 6000 which I used to buy. The connector is still plastic but the straps are better - unlike the 6000 masks no stretching so far even with a lot of use. Also the silicone rubber seals better than the other models. Not expensive, for example:
    https://www.amazon.com/gp/product/B008MCUT86
    https://www.amazon.com/gp/product/B008MCUS28

    I keep these in various sizes for shop visitors and woodturning students, and separate respirators for dusty farm tasks such as cleaning out poultry pens. (Repeat students and farm helpers get their own.)

    Are you sure the straps aren't replaceable? Maybe it varies by model - I don't remember the strap fused to the respirator on mine. I'll have to check. Amazon lists some, searched for replacement strap for 3m respirator.
    https://www.amazon.com/s/ref=nb_sb_n...+3m+respirator


    JKJ
    That link looks better than what I have, but still has some of the elastic- although not as much. I'm not sure my model. It was the best HD had that day. I paid a lot more than the one in your link.

    Quote Originally Posted by Dan Friedrichs View Post
    I tried an "Elipse" respirator:
    https://www.amazon.com/GVS-SPR457-El.../dp/B013SIIBFQ

    but was disappointed with the poor face seal. Went back to the 3M one...
    If I could find filters locally, maybe.

    Quote Originally Posted by Clint Baxter View Post
    I've used the MSA half mask respirators since i got fitted for them when doing HAZMAT response actions. Reasonably priced and there is a full range of filters available to whatever you wish to protect yourself from.

    Clint
    Small world. I am spill cleanup certified. I hated the mask fit with the yucky stuff they fume at you.

  15. #15
    Join Date
    Feb 2008
    Location
    E TN, near Knoxville
    Posts
    12,298

    Maybe give 3M another try

    Quote Originally Posted by Malcolm Schweizer View Post
    That link looks better than what I have, but still has some of the elastic- although not as much. I'm not sure my model. It was the best HD had that day. I paid a lot more than the one in your link.
    I checked the straps on some of mine, a 6000 series and a couple of the 7500s. All have replaceable elastic. Also, as I mentioned, the elastic on the 7000 series looks like better quality than the 6000 models. Perhaps try the 7502 - it's a Medium, whatever that is, and fits me perfectly. The 7501 is a Small and fits a couple of female students.

    When shopping for these I looked at one in Home Depot and looked like a cheaper model with a higher price. It also came with cartridge filters for volitales which I didn't want - maybe that was one reason for the higher price. I use the pink P100 particle filters.

    respirator.jpg

    When I spray chemicals I have a couple 3M full face respirator, also comfortable and feels strong. I don't use it at the lathe but maybe the impact rating is high enough - I didn't check. The half-face and full-face respirators will take the same filters. They are more expensive.
    https://www.amazon.com/3M-Remediatio.../dp/B00AR63SQA

    It looks like this but I use the cartridge filters for volatles instead of the pink particulate filters.
    respirator_full_face2.jpg
    As a bonus, when cutting a firebreak in the woods with my tractor a few years ago I discovered this was excellent for keeping smoke out of my eyes.

    JKJ

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •