The motor on my Clearvue Max will not start.
When I click the remote to turn it on I hear a hum from something trying to work - this trips the breaker if I don't click it off right away.
I turned the motor on / off several times over 10 minutes on the day it stopped working, which I don't normally do. The temperature in my shop was 93°, so it was likely hotter up at the ceiling where the motor is mounted.
I also did not have a fan blowing on the motor.
I have tried to reset the thermal overload reset button but it doesn't move at all - zero action. I unscrewed the junction box from the motor to get better access to the reset button but as I say it does not budge.
Is there a simple fix, as I hope, or is my motor fried?
How can I test for this without taking the whole system apart?
thanks, Mark