Results 1 to 4 of 4

Thread: Automatic Cermark Stirrer

  1. #1

    Automatic Cermark Stirrer

    I got tired of stirring Cermark settled at the bottom of high priced 250g bottles, so I had an idea.

    Put (2) 1/2" Nuts or ball bearings or washers etc, into Cermark 250g bottle, place bottle in rock tumbler for a few hours prior use or every once in a while to keep stirred and fresh.


    Fits bottle perfect.
    IMG_2794.jpg


    4" PVC pipe with end caps for bottles which are misshaped or too small.
    IMG_2795.jpg
    Red Bolt Laser Engraving
    Houston, Texas

  2. #2
    Join Date
    Aug 2006
    Location
    Suwanee, GA
    Posts
    3,686
    I built one that holds two bottles of Cermark and two containers of white ink for my UV printer. It runs 24/7 and I never have to worry about mixing again! No need to put any nuts or washers inside when it runs continuously.

  3. #3
    Join Date
    May 2005
    Location
    SE South Dakota
    Posts
    1,538
    BRILLIANT!!!!
    Shows I'm never too old to learn.

    Bruce
    Epilog TT 35W, 2 LMI SE225CV's
    CorelDraw 4 through 11
    CarveWright
    paper and pencils

  4. #4
    Quote Originally Posted by Gary Hair View Post
    I built one that holds two bottles of Cermark and two containers of white ink for my UV printer. It runs 24/7 and I never have to worry about mixing again! No need to put any nuts or washers inside when it runs continuously.
    True enough regarding no need to add nuts or washers. But if you had seen the Cermark caked at the bottom of one bottle I accidentally left open, it was clear the Cermark needed a little help.
    Red Bolt Laser Engraving
    Houston, Texas

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •