Hi all,
So I need a project idea for this walnut slab. I have a few more so any ideas are good. This one I flattened and debarked this morning.
thanks in advance.
20220115_114840.jpg20220115_114847.jpg
Hi all,
So I need a project idea for this walnut slab. I have a few more so any ideas are good. This one I flattened and debarked this morning.
thanks in advance.
20220115_114840.jpg20220115_114847.jpg
Distraction could lead to dismemberment!
Charcuterie board? Corner shelf?
The corner shelf might be an idea if i can figure out where to put it, and need to figure out what to do with the rest. Another Charcuterie board is not a good idea.
Distraction could lead to dismemberment!
What size is the slab ?
That narrow width might work for a hall table or sofa table.
Brian
"Any intelligent fool can make things bigger or more complicated...it takes a touch of genius and a lot of courage to move in the opposite direction." - E.F. Schumacher
I had one like that, after 20 years I got it out of my shop and into a friend's shop
Last edited by Justin Rapp; 01-18-2022 at 4:47 PM.
Distraction could lead to dismemberment!
The shape suggests a trestle table or bench if used in pairs.
I will come up with something. It warped a bit after flattening even though I made sure it had air all around, so i'll lose another1/8" maybe to flatten it again.
I don't have a matching pair unless I use another slab and take off the live edge, make some wide plank boards and do a bench. That is actually a good idea and i'll think more about it. I am not set on using live-edge.
Distraction could lead to dismemberment!