Quote Originally Posted by Bryan Lisowski View Post
I really don't see the wye issue as a problem, I don't see how you would get that much debris to clog the system. The reason I say this is because if you have the system on, and it has enough power to move the air and debris you should be running the DC for long enough after completing the task without even thinking about it. For example, if I'm routing a profile on a board on a router table, after it passes the bit, I am moving the work piece, shutting off router, then shutting off the DC.
I've got two installed incorrectly. They need to be opened periodically to get them cleared if they aren't used. They can and do plug to the point air flow alone will not clear them.

It's not a time issue and allowing the trunk top clear, it's unused drops that get plugged as chips don't 100% make it over the hole in the floor of the horizontal trunk or branch.

The turn to the floor is the lesser of evils