Originally Posted by
Nick Andraka
Joe,
Do you have a link to that thread?
There is definitely no encoder strip on the X axis bar. There are no wires at all running to the lens or anything else moving up and down the X axis bar.
The ribbon cable on the left side y axis does control the X axis motor.
There is an enclosed optical encoder on the back of the X motor, it is non serviceable.
Nick
Sorry Nick, links to other forums are not allowed by the terms of service.
Sammamish, WA
Epilog Legend 24TT 45W, had a sign business for 17 years, now just doing laser work on the side.
"One only needs two tools in life: WD-40 to make things go, and duct tape to make them stop." G. Weilacher
"The handyman's secret weapon - Duct Tape" R. Green