Results 1 to 8 of 8

Thread: Article #4: Making a Segmented Bowl by Ken Salisbury

  1. #1
    Join Date
    Feb 2003
    Location
    Gloucester, VA
    Posts
    1,997

    Article #4: Making a Segmented Bowl by Ken Salisbury

    Bravo to our latest contributor--Ken Salisbury!

    Here's an article for the intermediate woodworker
    on making segmented bowls!

    The article can be found here:
    http://www.sawmillcreek.org/articles/4

    Comments welcome!

    _Aaron_

  2. #2
    Mike Schwing Guest
    Quote Originally Posted by Aaron Koehl
    Bravo to our latest contributor--Ken Salisbury!

    Here's an article for the intermediate woodworker
    on making segmented bowls!

    The article can be found here:
    http://www.sawmillcreek.org/articles/4

    Comments welcome!

    _Aaron_
    Excellent article Ken! When one day I finally buy a lathe....

  3. #3
    Join Date
    Feb 2003
    Location
    Edmonton Alberta
    Posts
    289
    Quote Originally Posted by Aaron Koehl
    Bravo to our latest contributor--Ken Salisbury!

    Here's an article for the intermediate woodworker
    on making segmented bowls!

    The article can be found here:
    http://www.sawmillcreek.org/articles/4

    Comments welcome!

    _Aaron_
    A big thanks to Ken for taking the time and expertise to bring this information to the site.

    Bob

  4. #4

    Smile

    Good Post nice Download thx
    Spread The Wealth

  5. #5

    Segmented bowls stave construction

    Ken I love making segmented bowls. I use a slightly different technique which involves using a miter saw and compound miters. I learned this technique from Don Russell at John C. Campbell Folk School. It involves using a compound miter booklet that you get from Bridge City tools. It works great but I am probably not the best one to explain it. I have done quite a few bowls and vases with the technique. In October I am taking another course that carries the technique farther to create rings of compound miters to form an urn. I hope to be able to post pictures when I return. Love the segmented construction. It has reduced my scrap barrel significantly.
    Big Mike

    I have done so much with so little for so long I am now qualified to do anything with nothing......

    P.S. If you are interested in plans for any project that I post, just put some money in an envelope and mail it to me and I will keep it.

  6. #6
    Join Date
    Jan 2005
    Location
    Augusta Ga area
    Posts
    23

    buy a lathe

    Sweet looking bowl. Makes me wanna go buy a lathe and give it a shot. Nice job!!!!
    "To us and those like us"

  7. #7
    Join Date
    Jun 2004
    Location
    Cape Cod, Ma
    Posts
    762
    Great tutorial, Ken. Although I'm not a turner,YET, this was very informative....and tempting. Good job.

    Lou
    Procrastination.......

    Maybe I'll think about that tomorrow

  8. #8
    Thanks for the Article Ken! Segmented bowls is something I have always wanted to try, this article will make it easier!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •