Smelled real nice while I was turning it. 5 wide 2 1/2 tall, Mylands friction polish and Renn. Need to get a light box.
Thanks for looking.
Dennis
cedar 1.jpg
cedar 2.jpg
cedar 3.jpg
Smelled real nice while I was turning it. 5 wide 2 1/2 tall, Mylands friction polish and Renn. Need to get a light box.
Thanks for looking.
Dennis
cedar 1.jpg
cedar 2.jpg
cedar 3.jpg
Great looking cedar bowl Dennis. Well done.
Bernie
Never put off until tomorrow what you can do the day after tomorrow.
To succeed in life, you need three things: a wishbone, a backbone and a funnybone.
Nice bowl Dennis! Love all the color variations!
Steve
“You never know what you got til it's gone!”
Please don’t let that happen!
Become a financial Contributor today!
Way to go Dennis, cedar is not the easiest to turn and not get cracks.
Glenn Hodges
Nashville, Georgia
"Would you believe the only time I ever make mistakes is when someone is watching?"
I second what Glenn says, I cut a cedar and just about everything I turned ended up cracking, even spindle work. Maybe the tree I had wasn't big enough, anyway great looking bowl.
Steve
When all is said and done--more is usually said than done.
Glenn and Steven there are plenty of very small cracks in this bowl. I had to stop turning the bowl and filled them with thin CA and put it in the DNA. Let it dry for three weeks and it seems Ok now.
Dennis
Dennis,
Did the vibrant color seem to fade at all? I got a nice size log of cedar that I didn't turn right away. While it was waiting, the end grain faded in the sun to the point that it seemed to almost match the sap wood.
I was thinking that the UV rays of the sun may have had some effect on the wood. The fading only seemed to be near the surface because the inside was still a brilliant dark pink to mid purple when I did my rough turning. The roughing are drying in a box of chips right now and haven't seemed to fade. Is there a connection?
Also, what other finishes could be used? Does the friction polish require a Beall system? Can cedar be used for food service (nut trays, candy dishes), and what would the appropriate finish be?
Regards,
Chris