Now that I have finished the miter station and repaired the cyclone I can now get back to making sawdust. This is a bandsaw box I made for my mother-in-law. I always wanted to make one of these so I picked up a book called “Building Beautiful Boxes” by Lois Ventura. I went looking for wood and found some Canarywood at Mike Mastin’s place, Curly Woods. I picked up an Emerald Green flock kit at Woodcraft for the inside of the drawers.
<bk>
This is a jig I made to install the drawer pulls. I had to install the pulls with brass dowels because I got ahead of myself and applied the finish before installing the pulls. I made a post last week about the problem and Don Selke came up with the idea of using dowels.
After drilling the holes I used quick set epoxy to attach the pulls.
<bk>
Thanks for viewing
Steve