Almost, as I still have to install my front vise...
Top was made from maple I had been drying for about a year. ( http://sawmillcreek.org/showthread.php?t=49124 )
Dimensions are 4"x24"x84". The height is 33"
The base was made from some laminated 2x4 and a couple of 2x8 that I had left over from a job of mine. I would have liked to used maple for the base, but the cost was a factor.
Tail vise is made from some QS sycamore I bought from a forum member earlier this month. Vise is a LN
What I really like about the project is that the maple was cut in my home state by a friend, dried for a year by me and also moved with me 3 times this year, until it ended up in my new shop in TN.
It took quite some time to mill all the maple down from rough 9' boards to what I ended up using. All said, it took about 30+ hours start to finish.
Thanks also to the two forum members who took time to answer a couple of questions I had along the way.