Hi Scott,
Yes, the FT3000E has above table height adjustment as well as above table shaft lock and the collet protrudes above the table for bit changes. Details here:
http://www.freudtools.com/p-261-ft30...ge-router.aspx
Last edited by Charles McCracken; 10-19-2007 at 12:08 PM.
Charles M
Freud America, Inc.
Charles M
Freud America, Inc.
Anyone use the Freud FT3000 yet? I got a brief chance to look at it, and it was my impression that the height adjustment knob would be find for fine height adjustments, but if you needed to use this same crank to raise the bit out up out of the table that it would take FOREVER to turn that knob enough times to get it up there. Did I miss something, or is there a faster/easier way to quickly raise the bit up out of the table from above to change bits?