I would like to create a rolling outfeed support table for my Jet Contractor Saw. Building the table is not a problem, but I was wondering if there is a good way to adjust the height to make it level with the table top.
I was thinking of using threaded inserts into the top of the table frame, with adjustment screws in the top so I could adjust the height of the 4 corners to be level with the top of the table saw.
However, I am not quite sure how to have the adjustment screws both hold the top on, and adjust for height.
I am also not sure if this approach would be stable enough (would the top wobble?)
Thanks,
David Genrich