Keith,
Thought I would say hello to all,
and see if I could add to this thread as I have not posted but one time before back when I got my MM bandsaw. I have had the single speed SF like yours since mid last year. I just built a new house and bought it to run all the trim with. Well job schedule and health set me back and I ended up having it done. I have since ran mouldings on mine and have been extremely impressed with the quality of this machine. After trying to set the guide rails up straight to the cutters I saw Norm run some moulding on his W&H and it looked like he attached the wooden guide rails to a 1/4 piece of ply and then c-clamped it to the table, I tried this and it works
great. I plan on making this setup for all my cutters.
Also I see that lately people have been following along while others have been building new shops. I hope to start construction on my stand-alone 24x32 shop this week, I will grab some photo's as we go along and post them.