Hello all.
First - sorry, no pictures :-(
I just received my new jointer, man this thing is heavy! I was double-checking all the critical areas (knife adjustment, parellel tables, etc) and noticed my fence would be 90 deg. to one table and not the other? I first double-checked that the tables were parallel, they were. It appeared the fence was warped (much like me!).
The fence is mounted using a round bar bolted into a flat bottomed "V" cut-out. The cut-out is in the fence, the bar is mounted to the rest of the fence carraige.
Anywho, I figured I would check to see if the bolts may leave some room for adjustment............they do.
I was able to get the fence perfect, in a bout 1/2 hour of adjusting, re-adjusting, etc.
Additionally, I have heard of damages received during shipping. I had no damages of any sort (no scratches also). I was pleased to see this.
This is not the first Grizzly tool I've purchased. I also have a belt/disc sander and an impact wrench. The quality is very good.
I can't believe the finish and ease of use with this jointer.
Hope the fence description helps someone.
Regards,
George