I’m building a Shaker huntboard for my church auction. (See pic below)
<o></o><o></o>
http://www.danarobes.com/retired%20pieces/mini.htm
I’ve built the carcass and top out of cherry. I have some nice curly maple veneer for the drawer fronts.
<o></o>
But now I have questions about the drawers:
<o></o>
#1. All the books say you should apply veneer to both sides of the board so they don’t warp. Do I really need to veneer the back side of the drawer fronts (I’m using ¾” maple for the front)??? (I don’t think it would look good)
<o></o>
#2. I’m going to use half blind dovetails for the drawers and of course using contrasting woods really looks greats. What wood should I use for the draw sides if I’m using maple for the drawer fronts?
<o></o>
Any suggestions???
<o></o>
Thanks!
<o></o>
-jj