[OP]
Contributor
I would like a suggestion for a finish for a set of dining room chairs. I would like a satin wipe-on or brush on finish that is easy to apply. I just finished a walnut coffee table with Osmo Polyx hard wax and think that it is a beautiful finish, but I don't know if it is robust enough for a set of chairs. I'd welcome any and all suggestions and comments. Thanks.
-Howard
Contributor
Arm-R-Seal comes in satin, wipes on very well, especially on small areas, and is very, very durable. However, it will have more shine than Osmo Polyx unless you applied several coats and buffed it. The look likely will be different, too. ARS will have more depth and highlight the grain more.
John
Posting Permissions
Reply With Quote