I'm thinking of face gluing two boards to each other.
If I want a longer term mechanical guarantee -
(1)
- are these only for covering screw heads
- or can they be used as dowels too (but only about 7/8 of the way through two boards totaling 1 1/4" thickness
- I like that they can be cut into face grain so they're not too visible
https://www.leevalley.com/en-ca/shop...waAq-HEALw_wcB
(2)
- can these dowel cutters be used in face grain
- or is it only end grain
https://www.leevalley.com/en-ca/shop...-tenon-cutters
Thanks