Originally Posted by
stephen thomas
Do what Jim Becker mentions, find one of the local sheet goods jobbers, and see if you can make "will call" purchases. Or maybe even get it delivered if you buy 10 or a dozen sheets or maybe $1,000 minimum. (typical break points)
Industrial Plywood out of Reading and Lewisburg have no minimum but a $300 minimum for free shipping. There is a small fuel charge but it's less than the gas I'd use to drive to Reading not to mention the travel time. They will also replace defective on the next delivery day. (They are in my area twice a week)
--
The most expensive tool is the one you buy "cheaply" and often...