For those of you that have made the transition to Norfab duct for their duct collection I have a question. Has anyone that had snap lock pipe retained part of it in the new design.
I have an "old" Oneida 2 hp component system and the original snap lock piping I bough with it plus some I have added over time. Fast forward 20 years and the duct has some leaks and is generally seen some wear from the years and a cross country move. (This is mostly in the drops.). I have added machines, changed placement of machines and generally have now got a system that does not resemble what I bought. I still only run one tool at a time so I am confident that my main trunk is big enough.
What I plan to do is upgrade to a 5 HP Dust Gorilla Pro and change the duct to Norfab. Since my main trunk line (7" out of the collector stepping to 6") I would like to keep it and transition to Norfab for the drops. Has anyone done that, If so, how did it work and what specific adapters did you need to purchase. I will likely pay for a new study with the new ducting but if I can I would like to save a buck or two on the main trunk line
Thanks
Rob