Lee Schierer
USNA '71
Go Navy!
My advice, comments and suggestions are free, but it costs money to run the site. If you found something of value here please give a little something back by becoming a contributor! Please Contribute
David Schmittou
984 Ski Park Rd.
West Branch MI. 48661
Thanks Dave. Payment is on the way.
I apologize again for my "senior moment"
You only need 2 tools in life. If it's supposed to move and doesn't... use WD40. If it moves and shouldn't... use duct tape.
I understand - believe me lol.
The cole jaws will come with the nova bowl buffers (much safer and a $32 add on new) will talk a 9.2 " bowl internal and 11" external - I would take $55 for those, I also have a 16" Langsworth chuck - the older style that goes in dovetail chuck jaws I'll take 125 for that. Let me know if you need any other information. some reason I can't post a picture on a reply, I'll post it in a new thread - should be right under here - thanks
Thanks David. What's the diameter on the Cole jaws and what's the length on that scraper? If you have a link to either of them that would work too. I have a Comet lathe so I want to see if that set would fit since it's not very big. And some of the full size tools can be a little unwieldy with the smaller stuff I normally turn.
The scraper is 21" overall, the nova jaws are 9 1/2" closed - 10 1/2" open on a supernova chuck, I would say that it will hold a bowl as small as 2" to as large as 10", I think that I mentioned it but the scraper comes with 4 new inserts and the one on it is on its first side so 19 new edges I always bought a lifetime supply when I ordered something new
Last edited by David Schmittou; 05-19-2024 at 1:29 PM.