-
Alan, I just went back and reviewed some material I have from Michael Fortune. Take a look at how many clamps he has to ensure that the pressure is distributed through the laminate assembly. Also, notice that he has an interesting caul assembly: a strip of bending plywood with blocks, then some padding (likely hardboard or bending plywood), then the laminates.
bending caul.jpg
He does have a reference to using a pressure hose, but warns that it can be very dangerous...
Mike
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules