Hello,
I just installed a cabinet of full extension drawer slides. They slide smoothly so my drawer width is good. No binding. I took a lot of care to keep things level, True and within tolerance. The only issue I have is that when the drawers are fully retracted, about half of them retract fully on one side, and on the other side I can push it with my hand and get an extra two or 3 mm. My best guess is that the frame is not exactly 90°. I did check it throughout the construction and some of them are indeed not square despite my best efforts.
I thought that maybe there was some adjustment I can make so that when fully retracted all the faces are in plane with each other. My best guess is the only way to fix this is to adjust the drawer front depth on one side. Is my analysis and solutionCorrect?Also if I am to adjust the depth of the front which I wanted to attach with a Brad nail gun, what is the best way to shim as I don't want to bend the front?
Thanks