New Sawstop, love the saw, some of the down flow dust collection could be better. A lot more sawdust around the table than my old craftsman cabinet saw, but so much better quality saw.
Anyway, you mount the switch box using a couple M6 star head machine bolts with a washer and lock washer under the head, no nut. I can't get this tight enough to keep the switch box fixed in place. Always works loose so the whole box moves back or forward when turning the unit on/off. I tried some locktite on the threads, no help. I bough some M6 nylon insert lock nuts to put on the bolts, but they will not thread on past the nylon in the nut. I took off the lock washer to make sure I had enough thread coming through to go into the nut, but the threads will not go into the nylon on the nut.
Any help understanding why much appreciated? I guess I can put the lock washer on the back and use a standard M6 nut instead.
Thanks.
Brian