I have this design and I am looking for feedback or improvement ideas. Lee Valley has a similar chute that uses magnets, which I have, but my hose is always pulling it out of position. Even had one time the hose pulled the chute right into the blade guard, if no blade guard it would be have been ugly.
So I came up with these designs that can be clamped down using the mitre track. It works really well with the shop vac, or if I run another hose from the dust collector. Also working really well on my router table. Would love to hear feedback from those of you who like to get into the technical details of airflow patterns. Or any other thoughts.