I've been on the lookout for a bandsaw for quite a while now and a deal finally came along that fit both budget and needs. It took 1.75 hours to put together from box to working saw. I still need to check table squareness to the blade but tracking, guide adjustment and a general once-over are done. I do see where the corner cutting as far as materials has gone compared to the older 3/4 HP Delta we use at work but I think this will fit my needs for the near future. Except for the blade that came with it, wow, I think I'll have to head down to the store for a couple of decent ones this weekend. In any case, the mandatory picture is below. I'm in the middle of rearranging my shop so for now it gets center stage.