Hello!
I tried searching and found a lot of great and helpful info for cutting dados into plywood. But I'm still at a loss for one question.
I'm building a closet storage system and I'm going to use dados for the storage cubbies. I'm going to be using 3/4" plywood all around and while the main frame will be painted, I'm going to be staining the shelves which will be fit into the dados.
When choosing the dado router bit, should I add any size for the finish on the plywood which will include some polyurethane?
Seems like a 3/4" would work if I need to compensate, but I'm wondering if a undersized plywood bit would also work for a tighter fit.