So, I got an RV fridge for a song for the Airstream. It works great. However, the fridge needs a 1/8" x 24"x36 door panel and a smaller one. Dometic no longer makes this panel and has nothing larger that could be cut down to size. The one source I can find for 1/8" plywood wants $450. That is a bit much. I am thinking to make my own, but, how to do it?
I have some cherry that I think to slice into 1/16" x 6" wide strips and glue two layers at 90 degrees.
Do I glue both sides?
I have no vacuum press so I will use some dead weights.
Ideas or suggestions would be appreciated.
Thanks. John H