Even though I have a Tormek T8 I'm going to give the Scary Sharp System a try. All the blades in the photo have already been flattened & sharpened on the T8 so it will be interesting to see if Scary Sharp will produce even a better edge.
SS.jpg
Even though I have a Tormek T8 I'm going to give the Scary Sharp System a try. All the blades in the photo have already been flattened & sharpened on the T8 so it will be interesting to see if Scary Sharp will produce even a better edge.
SS.jpg
DJO Furniture Maker / Timberwerks Studio
DJO Furniture Maker / Timberwerks Studio
Hi Guys
Just a quick update on shipping out batch 2. I'm still running a bit behind due to my schedule at work. Once this week is over I'll be able to get back on track since I'll have more time to spend in my studio. Speaking of work, I found a couple cut offs that are actually Maple skateboard laminations. I'm thinking these may make some interesting looking planes, Ebony bodies with the laminated sides. Once I get back on schedule I think I'll make 4 of them and see if there is any interest in these.
Thanks for your patience with batch 2.
L1.jpg
L2.jpg
L3.jpg
DJO Furniture Maker / Timberwerks Studio
A quick update on batch two of the apron planes. Today was the first day I had a chance to spend time in the studio for awhile and I made some progress. The blades are all sharpened, wedges are shaped & fitted and I'm currently in the process of opening up the mouths to accept small shavings.
The side by side photo of the blade shows before sharping on left, after on right.
P6.jpg
P5.jpg
P4.jpg
P3.jpg
P2.jpg
P1.jpg
DJO Furniture Maker / Timberwerks Studio
Well, I finally made it to the finish line with batch two. Now to wait a few days for finish to cure before final buffing and they'll be ready to ship out Saturday. This batch turned out great and really look fantastic! It's tough to tell from the photos but there is a plane in the group that has the Ebony body & Rosewood sides. This one has such a nice look to it in person.
Batch three will start soon. Two of the planes from this batch are reserved and the others will be put up for sale once they are done.
S1.jpg
S2.jpg
S3.jpg
S4.jpg
S5.jpg
S6.jpg
S7.jpg
DJO Furniture Maker / Timberwerks Studio
Where did you get the new honing guide? Looks like a really well made Eclipse style guide.
It's made by Sharp Pebble, very nice quality. I purchased from Amazon $35.00. https://www.amazon.com/dp/B09BPSRHWP...roduct_details
DJO Furniture Maker / Timberwerks Studio
Today is the day the planes get their blade & wedge back in place and take a shaving before being boxed up. Rather than do a group shot I'll post an individual photo of the plane and the name of the person it goes to. It may take a couple days to get through all.
First one up is for Ed S. Ed's plane has a Gaboon Ebony body, wedge pin and wedge with Curly Maple sides.
Thanks for you patience Ed!
P1.jpg
DJO Furniture Maker / Timberwerks Studio
Ebony with Cocobolo sides for Luke S.
P2.jpg
DJO Furniture Maker / Timberwerks Studio
All Ebony for Jack D.
Thanks for your patience Jack!
P3.jpg
DJO Furniture Maker / Timberwerks Studio
All Ebony & Ebony / Cocobolo for Art K.
P4.jpg
DJO Furniture Maker / Timberwerks Studio
All Ebony for Mel M.
P5.jpg
DJO Furniture Maker / Timberwerks Studio
And the last one for batch two, all Ebony for Thomas H.
P7.jpg
DJO Furniture Maker / Timberwerks Studio
I'm happy to say all the planes from batch 2 are now on the way to their owners. Batch 3 will start tomorrow, as many as you now know these could take 6 - 10 weeks to complete due to my work schedule. If the time frame is not an issue for you and you would like to reserve one please send me a note. After more closely keeping track of time and materials I need to adjust the price of these to $150.00, Priority Shipping to address in contiguous USA included. All plane bodies, hybrid wedge pins and wedges will be Gaboon Ebony. Brass rod is now used for the hybrid pin. Sides can be Gaboon Ebony, East Indian Rosewood, Bubinga, Curly Maple, Cocobolo, Bocote, Jatoba, or Paduk. If you prefer you can order your plane with a hybrid wedge pin and/or wedge from any of these woods as well. If no mention is made the Gaboon Ebony hybrid pin and wedge will be the standard default.
I'm also happy to say that better photos will now be included with these updates. As an example shown below is an all Ebony plane.
Thanks Guys!
P1.jpg
Last edited by Dale Osowski; 07-03-2022 at 2:35 PM.
DJO Furniture Maker / Timberwerks Studio
Looks like some planes from Batch II are starting to arrive to their owners.
" I just received mine in all-ebony, and it's a work of art. I'm very pleased. What a beautiful little tool.
Thomas "
DJO Furniture Maker / Timberwerks Studio