Lenox creates some very fine blades in many types. Does anyone remember "Hack Man" The Muscle Bound promo guy from the 1980's who sawed a locomotive in half with a hand hacksaw?
Screen Shot 2022-05-16 at 7.05.43 PM.png
Last edited by Maurice Mcmurry; 05-16-2022 at 8:11 PM.
I run the Woodmaster CT on my Felder FB510. It is a great blade and I have excellent results with it.
Mike
JonathanJungDesign.com
I agree that the 1/2" version of the Trimaster may be more forgiving, but I haven't tried it. When I bought mine "a long time ago", it was the 1" version through the saw manufacturer and my MM16 is a 16" saw. It ran fine, but that's still a lot of band to tension and wrap around those small wheels.
--
The most expensive tool is the one you buy "cheaply" and often...