Added an extension wing to the tablesaw. It’s a Saw Stop wing bought from Grizzly.
I like the added table space plus the added stability of the extra weight.
78C81396-C285-4927-BF1C-DF3AE0D2DB5E.jpeg 86A27991-38F8-4400-9292-2386993E5CF5.jpeg
Added an extension wing to the tablesaw. It’s a Saw Stop wing bought from Grizzly.
I like the added table space plus the added stability of the extra weight.
78C81396-C285-4927-BF1C-DF3AE0D2DB5E.jpeg 86A27991-38F8-4400-9292-2386993E5CF5.jpeg
Wow, what a clean shop....
Randy Cox
Lt Colonel, USAF (ret.)
Hi Randy
Well, I worked around aircraft my whole life, a large part of it as an Inspector. FOD (Foreign Object Debris/Damage), was just not allowed, plus very strict tool control. So it is just part of me, I clean up the shop when done for the day.
Thanks, Mark
Last edited by Mark Brewer; 01-06-2022 at 7:58 AM.
I did the same thing, just incorporated it into the outfeed. It’s the single best thing I’ve ever done regrading tablesaw.
D32A411E-4F5F-4794-857B-9F9212526A9B.jpg
Wow, an aircraft carrier in a wood shop.