Happy Holidays to all!!!
I have a question regarding the technique of leveling the infeed/outfeed tables to decrease the occurance of snipe. In a review of benchtop planers, in a recent Wood Magazine, the writers suggested setting a slight tilt on the front and back edges of the tables. Has anyone had success implementing this technique with the DeWalt model?
Secondly, the base of the planer does not having leveling Allen set head screws. The stamped metal trays have sloted holes (3) on each side. Is it more successful, and time efficient, to adjust the screws on one table side then the other, or is there a better method?
In advance, thanks for your responses, suggestions, and guidance.
Mark Mrsa