Old machines that ran 5000 - 6000 rpm with much knife projection were pretty loud. New machines with Tersa or spiral heads running that rpm are pretty quiet.
Old machines that ran 5000 - 6000 rpm with much knife projection were pretty loud. New machines with Tersa or spiral heads running that rpm are pretty quiet.
Ben, I agree with the others. Older jointers like those mentioned are excellent machines and can be had for a song if you look. I got my 16" Oliver for $150. Mind you, it needs a lot of cleaning up and a $2,000 helical head. But once going it will be irreplaceable except by the likes of a SCM $13,000 machine.
As far as moving it around your shop, I only have a used $90 pallet jack for both unloading these 2,000 lb machines off the trailer and for wheeling around the shop.
By the way, I'd be interested to see more of your space, since it's rented and commercial. There's not many with such a space as we have.
JonathanJungDesign.com