I have an idea I'm thinking about that's not fully developed yet but one of the ways to make it that I think would look the best would be to dye wood. But I would need to get the dye deeply penetrated due to the amount of material that would need to be removed. Of course that's not easily done. But what about slicing veneers 1/8" thick on the bandsaw, dying them (possibly soaking them for a long duration), and then gluing them back together. I was thinking 1/8" because there would be multiple colors and if I sanded to the glue on one of the colors I could sand slightly further with less risk of hitting glue on another color. 1/8" soaked is only 1/16" from each side. I would like the color to be even throughout the wood.