Greetings to all --
I've got equipment arriving in December, but well in advance of that, I'm putting in some rockwool insulation up and must deal with the floor. Original floor is a thin layer of concrete over stone, circa 1870. I filled in the most egregious areas of the floor with epoxy last year, and will probably do more of that over time.
Not only is the shop floor uneven, but the 4'x8' sheets of plywood are not flat. My main concern is that it's a trip hazard, and I'm wondering how to best address that.
All feedback welcomed --
Thanks,
Ned
closerampview.jpgfarrampview.jpgshop1.jpgshop2.jpgshop3.jpg