-
The question I'm having....is this a Sargent made gauge....or is it a Stanley?...The only markings on it are a "Sargent's" "Patent" JULY 22 1973
Only markings on the handle are where someone "marked" it with a triangular file....
No mention anywhere about "Stanley"..
Other question....is about that Greenlee No. 442 spiral screwdriver....with a rosewood handle, no less. Any info?
Walkabout Friday, Greenlee 442.JPG
even at full extension...
Walkabout Friday, driver extended.JPG
The spiral stays hidden....came with a Phillips#2 tip, BTW
There was an AMF Block plane...that I should have bought...
Walkabout Friday, Boston cutey.JPG
Cute, ain't it? has the A. M F. spelled out on the rear deck...skinny little "apron" plane....twas sitting on a shelf...
Walkabout Friday, across the table.JPG
may go back and pick it up...IF it is still there.....
details on the bevel gauge..
IMG_6049.JPGIMG_6048.JPG
two pins down at the end..go all the way through. Handle to tighten the gauge has a pin peened through it. "Bolt" as the pivot, looks almost like a split nut.....lots of "patina" but no rust....spent $5 on it..
Last edited by steven c newman; 03-31-2021 at 2:25 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules