Saw - Laguna 14 twelve
Blades - 3/16" 4 TPI
Issue - I have had several blades that, as I cut with them, seem to cut, then bog down, then cut, then bog down (hitching might be a good description). This is as soon as I install them for the first time. If I take the blade off and put another on, it cuts smooth and cleanly. Most of my work is bandsaw boxes, so thickness of the wood tends to be around 4". I am using a Carter Blade Stabilizer, so contact with the guides by the blade is not an issue. Welds seem to be good.
Thoughts?